User Manual Q&AAnswer
Mar 02, 2025 - 08:33 AM
To set up the TANGERINE NF18MESH CloudMesh Gateway, follow these steps:
1. Ensure that the gateway is placed in an indoor location with good airflow and away from direct sunlight or hot areas.
2. Connect the gateway to the telephone wall socket using the DSL port on the back of the gateway.
3. Use a network cable to connect your router from the UNI-D1 port on the NBN Connection box to the blue WAN port on the gateway.
4. Wait for a few minutes for the gateway to connect to the network. The Power, WAN, and WiFi lights should display a steady green light.
5. After the gateway is connected, wait for up to 20 minutes for it to establish a connection with your devices.
6. Once connected, you can run a speed test to check the speed of your connection.
If you encounter any difficulties during the setup process, you can perform a factory reset of the gateway by following the instructions in the manual. Additionally, if you need further assistance, you can contact the technical support team at TANGERINE using the provided contact information.
Please note that the above instructions are a summary of the setup process. For more detailed instructions and visuals, refer to the TANGERINE NF18MESH CloudMesh Gateway User Guide.
Add New Comment