User Manual Q&AAnswer
Mar 02, 2025 - 07:57 AM
Installation of the TERMA VOLTAN Smart WiFi Radiator should be done by a qualified installer in accordance with all applicable safety regulations and other regulations. Here is a step-by-step installation guide based on the information provided in the manual:
1. Ensure that the radiator is intended for heating dry rooms only.
2. Adhere to the specified distances shown in the illustration during installation.
3. The circuit in the electrical installation to which the radiator is connected must have an appropriate over-current switch and a residual-current device (R.C.D.) with a sensitivity of 30 mA.
4. In wet room installations, follow the guidelines specified in the IEC 60364-7-701 standard.
5. Do not use extension cords or socket adapters to power the radiator.
6. Ensure that the power cord is not mechanically damaged before connecting the radiator to the power supply. If there is any damage, contact the seller or the manufacturer.
7. The device is made in protection class II, so take this into consideration when connecting it permanently to the installation.
8. Install the radiator on the wall according to the provided installation instructions.
9. Make sure the power cord does not come into contact with the hot parts of the radiator.
10. Turn off the power during installation or removal of the device.
11. Do not tamper with the interior of the device.
12. Hand over the information material to the end user of the radiator.
Please note that this is a general installation guide. For specific instructions and safety precautions, refer to the TERMA VOLTAN Smart WiFi Radiator Installation Guide provided with the product.
Add New Comment