User Manual Q&AAnswer
Mar 02, 2025 - 07:34 AM
To connect the Surenoo SLC4002A Series LCD Module to your device, you will need to follow the pin configuration provided in the user manual. The pin configuration is as follows:
1. VSS: Ground, 0V
2. VDD: Logic Power Supply
3. V0: Operating voltage for LCD
4. RS: Data / Instruction Register Select (H: Data Signal, L: Instruction Signal)
5. R/W: Read / Write (H: Read Mode, L: Write Mode)
6. E: Enable Signal
7. DB0: Data Bit 0
8. DB1: Data Bit 1
9. DB2: Data Bit 2
10. DB3: Data Bit 3
11. DB4: Data Bit 4
12. DB5: Data Bit 5
13. DB6: Data Bit 6
14. DB7: Data Bit 7
15. LED_A: Backlight Anode
16. LED_K: Backlight Cathode
Please refer to the user manual for more detailed information on how to connect the LCD module to your specific device.
Add New Comment