User Manual Q&AAnswer
Mar 02, 2025 - 07:31 AM
According to the Surenoo SLC2004C Series LCD Module User Manual, here are the steps to properly connect and use the LCD module:
1. Determine the interface: The SLC2004C Series LCD Module has a parallel interface. Make sure your device supports this interface.
2. Power supply: The LCD module requires a voltage of 5.0V. Connect the VDD pin of the LCD module to the 5V power supply of your device. Connect the VSS pin to the ground (0V).
3. Data and control signals: The LCD module uses various pins for data and control signals. Here is the pin configuration:
- RS (Register Select): This pin selects between data and instruction registers. Connect it to the appropriate pin on your device.
- R/W (Read/Write): This pin determines the read or write mode. Connect it to the appropriate pin on your device.
- E (Enable): This pin enables the LCD module. Connect it to the appropriate pin on your device.
- DB0-DB7 (Data Bits): These pins transmit data to the LCD module. Connect them to the appropriate pins on your device.
4. Backlight: If your LCD module has a backlight, it will have separate pins for the backlight anode (LED_A) and cathode (LED_K). Connect these pins to the appropriate power supply for the backlight.
5. Display connector: The LCD module has a 16-pin header for connecting to your device. Connect the pins according to the pin configuration mentioned above.
6. Operating temperature: The LCD module can operate in a temperature range of -20°C to +70°C. Make sure to keep the module within this temperature range for optimal performance.
7. Handling precautions: Take care when handling the LCD module to avoid static electricity discharge and mechanical shock. Follow the precautions mentioned in the user manual to prevent damage to the module.
By following these steps and referring to the user manual for further details, you should be able to properly connect and use the Surenoo SLC2004C Series LCD Module with your device.
Add New Comment