Answer

Mar 02, 2025 - 07:28 AM
To connect the DEVELCO PRODUCTS Air Quality Sensor to a Zigbee network, follow these steps:
1. Insert the batteries into the sensor, respecting the polarities.
2. The sensor will start searching for a Zigbee network to join. This process can take up to 15 minutes.
3. Make sure that the Zigbee network is open for joining devices and will accept the sensor.
4. While the sensor is searching for a Zigbee network to join, the LED will flash red.
5. Once the sensor successfully joins the Zigbee network, the LED will stop flashing.
6. If the scanning process times out, you can restart it by performing a short press on the round menu button.
7. After the sensor has joined the Zigbee network, you can close the casing.
Please note that it is important to ensure that the Zigbee network is open for joining devices and that the sensor is within range of the network for successful connection.
Add New Comment