How do I install the QAZQA Raspi WL 11.5 Black Gold Industrial Wall Lamp? (QAZQA Raspi WL Black Gold Industrial Wall Lamp Instruction Manual)

Answer

manuals.plus

Mar 02, 2025 - 07:15 AM


To install the QAZQA 104455 Raspi WL 11.5 Black Gold Industrial Wall Lamp, please follow the steps below:

1. Ensure that the electrical supply is switched off before starting the installation. It is recommended to switch off the power at the distribution box.

2. The installation of the lamp should be done by authorized and qualified technicians who are familiar with the regulations for electrical installation.

3. Take into account the minimal separation distance from other objects and the required room around the fitting. This will ensure proper ventilation and prevent any potential hazards.

4. Clean the lamp with a clean, dry cloth or brush. Do not use solvents or abrasives, and avoid dampness on all electrical components.

5. The QAZQA 104455 Raspi WL 11.5 Black Gold Industrial Wall Lamp is designed for indoor use only, where direct contact with water is impossible.

6. Depending on the protection class indicated, ensure that the fitting is properly earthed (Protection Class I) or double insulated (Protection Class II). Follow the instructions in the manual for the specific protection class of your lamp.

7. Take note of the symbols when connecting wires: Live conductor, Earth conductor, and Neutral conductor. Connect the wires accordingly to ensure proper functioning and safety.

8. If you are unsure about any aspect of the installation, it is recommended to consult a professional who can take local installation requirements into account.

Remember to always refer to the instruction manual provided with the QAZQA 104455 Raspi WL 11.5 Black Gold Industrial Wall Lamp for specific details and guidelines.