How do I connect the Creative GigaWorks T20 Series II Speaker to my computer? (Creative GigaWorks T20 Series II Speaker User Guide)

Answer

manuals.plus

Mar 02, 2025 - 07:11 AM


To connect the Creative GigaWorks T20 Series II Speaker to your computer, follow these steps:

1. Locate the right and left speakers. The right speaker is labeled as the "Right Speaker" and the left speaker is labeled as the "Left Speaker."

2. Connect the right speaker to the left speaker using the provided cable. The cable has a red connector on one end and a white connector on the other end. Connect the red connector to the red port on the right speaker and the white connector to the white port on the left speaker.

3. Connect the power supply adapter to the right speaker. The power supply adapter may vary depending on the country you are in. Plug the power supply adapter into a wall outlet.

4. Connect the right speaker to your computer or audio source. Use the provided analog audio cable to connect the right speaker to the audio output of your computer or audio device. The cable is normally provided with your TV, DVD player, or game console.

5. Adjust the volume, treble level, and bass level using the controls on the right speaker. The volume control also functions as the power on/off switch.

6. If you want to use headphones, plug them into the headphone jack on the right speaker.

Please refer to the connectivity diagram in the user guide for a visual representation of the connections.

Note: Ensure that you do not push any objects through the speaker openings and avoid spilling liquids on the product to prevent damage.