User Manual Q&AAnswer
Mar 01, 2025 - 06:26 AM
To properly use the Shinko PC-700 Series Temperature Sensor, please follow the instructions provided in the instruction manual. Here are the key steps:
1. Read the instruction manual: Before using the PC-700, it is important to read the instruction manual carefully to understand the proper usage and safety precautions.
2. Use the sensor for temperature measurement only: The PC-700 sensor is designed specifically for measuring temperature. Do not use it for any other purposes, such as measuring body temperature.
3. Adjust the input specification: Make sure to adjust the DFT-700-M input specification to match the sensor type. The sensor type is indicated on the code terminal (e.g., K, Pt100) along with its maximum measurable temperature. Failure to adjust the input specification may result in incorrect measurement values.
4. Do not use the sensor for certain measurements: Avoid using the temperature sensor for measuring the surface of objects, liquids, or the inside of objects. Additionally, do not use it as a sensor for the surface of moving or rotating objects. Doing so may cause malfunction or damage to the sensor and can be hazardous.
5. Avoid touching the temperature sensing section: After measuring, do not touch the temperature sensing section or protective tube immediately, as it may cause burns, frostbite, or other injuries.
6. Consider environmental factors: Take into account the temperature limits and conditions specified for the sensor. The grip, cord, etc. should be used in normal atmospheres (0 to 60 degrees Celsius) excluding the sensing part. Using them in high-temperature atmospheres may lead to malfunction or ignition of the sensor.
7. Clean the surface before measurement: Ensure that the surface of the object being measured is clean to avoid measurement errors. Clean the surface when its temperature is safe to do so.
8. Apply proper contact pressure: When using the sensor on the surface of an object, ensure sufficient contact pressure for smooth heat transition. However, avoid applying excessive pressure that may scratch, deform, or break the temperature sensing section of the sensor.
9. Follow specific instructions for different sensor models: Depending on the specific model of the temperature sensor (e.g., PCE-701, PCE-702, PCE-707, etc.), there may be additional instructions and considerations for different types of measurements. Refer to the manual for detailed instructions specific to your sensor model.
Please note that this answer provides a general overview of using the Shinko PC-700 Series Temperature Sensor. For more detailed instructions and safety precautions, refer to the instruction manual provided with the product.
Add New Comment