User Manual Q&AAnswer
Mar 01, 2025 - 06:23 AM
To install the NETGEAR RAX10 AX1800 WiFi 6 Router using the Nighthawk app, follow these steps:
1. Download the Nighthawk app on your mobile phone from the app store.
2. Connect your mobile phone to the router's WiFi network.
3. Open the Nighthawk app and follow the setup instructions provided.
4. The app will guide you through the process of connecting your router to the modem and setting up your WiFi network.
5. Once the installation is complete, you can customize your router settings, set up parental controls, and perform other functions using the Nighthawk app.
If you encounter any issues during the installation process, try the following troubleshooting steps:
1. Turn off your modem and router, and disconnect them from the power source.
2. Reboot your modem by turning it back on.
3. Reconnect your router to the modem and try installing it again using the Nighthawk app.
4. If you are still unable to install the router using the app, you can manually install it using the router web interface.
- Access the router web interface by visiting http://www.routerlogin.net in your web browser.
- Follow the on-screen instructions to set up your router manually.
For more detailed information and assistance, you can visit netgear.com/routerhelp or contact NETGEAR support through their website at netgear.com/support.
Add New Comment