User Manual Q&AAnswer
Mar 01, 2025 - 06:17 AM
To install the Cameras X50 Smart PTZ Camera, follow these steps:
1. Select a good spot for your camera: Choose a location where the camera's view is not blocked and ensure that it is within the coverage of the Wi-Fi network.
2. Install the bracket: Fix the camera to a desired location. You can either place the camera on a flat surface or fix the bracket to the wall or ceiling using screws, and then xxxx the camera to the fixed base.
3. Download and install the App: The camera supports Android and iOS App. Scan the QR code provided in the manual and follow the instructions to complete the user registration.
4. Set up the camera: Open the App and click "Add Camera Now". Enter the Wi-Fi network name and password that you want the camera to connect to. Target the camera at the QR code of the mobile App, with a distance of about 20cm (about 7 inches), until the camera emits a "Di" sound. This sound indicates that the scanning is successful and the pairing process has started.
If the camera has been previously connected to another Wi-Fi network or bound by another user, you need to unbind the device before rebinding. To unbind the device, power it on and self-check, then press and hold the reset button of the device for 5 seconds. The device will be reset and unbound.
5. Share the camera: If you want to share the camera with others, find the camera you want to share on the App homepage or camera setting page. Click the share button and enter the sharing page. Generate a QR code for sharing by clicking "Invite". The person you want to share with can then scan the QR code on their mobile phone and agree to the sharing request to complete the process.
Please refer to the provided instruction manual for more detailed information and troubleshooting tips.
Add New Comment