Answer

Mar 01, 2025 - 06:15 AM
To install the GIANNI PBH-100 Series Electromechanical Push Bars, please follow these steps:
1. Determine the desired height for the push bar and use the provided template to mark the mounting holes on both the door and door frame.
2. Install the cylinder with the cylinder plate, ensuring a 5mm extrusion for proper engagement.
3. Remove the end caps from the push bar by unscrewing them. Then, install the push bar on the door or mounting bar. Once installed, reassemble the end caps onto the push bar.
4. Install the strike assembly on the door frame, making sure there is a 4-5mm gap between the strike assembly and the end cap. Before tightening all screws, ensure smooth operation between the push bar and strike.
Please refer to the provided manual for visual diagrams and additional details on the installation process.
Note: It is recommended to pair the PBH-100 Series Electromechanical Push Bars with key cylinders or access control devices on the exterior for enhanced security and access control.
Add New Comment