Answer

Mar 01, 2025 - 06:13 AM
To install the ZALMAN CNPS9X Performa Flow Cooler on your Intel or AMD motherboard, follow these steps:
1. Before installation, make sure to read and understand the precautions mentioned in the user manual to ensure safe installation.
2. Check the components list and condition of the product before installation. If any problem is found, contact the retailer to obtain a replacement.
3. Determine the compatibility of the cooler with your motherboard. The ZALMAN CNPS9X Performa Flow Cooler is compatible with Intel Socket LGA1700/1200/115X and AMD Socket AM4.
4. For Intel users:
a. Remove the default backplate from your motherboard if it is present.
b. Place the Intel backplate included with the cooler on the backside of the motherboard, aligning the holes with the mounting holes on the motherboard.
c. Secure the backplate in place using the provided screws or clips.
5. For AMD users:
a. Remove the default backplate from your motherboard if it is present.
b. Place the AMD backplate included with the cooler on the backside of the motherboard, aligning the holes with the mounting holes on the motherboard.
c. Secure the backplate in place using the provided screws or clips.
6. Apply thermal grease to the CPU. Avoid contact with skin and eyes. If contact is made with the skin, wash it off with water. If irritation persists, seek medical attention.
7. Attach the cooler onto the motherboard by aligning the mounting holes on the cooler with the corresponding holes on the backplate.
8. Apply gentle pressure to secure the cooler in place. Avoid excessive force that may damage the fan or system.
9. Connect the cooler's fan cable to the appropriate fan header on the motherboard.
10. Double-check all connections and ensure the cooler is securely installed.
Please note that the above instructions are a general guideline. For detailed and specific instructions, it is recommended to refer to the user manual provided with the ZALMAN CNPS9X Performa Flow Cooler.
Add New Comment