User Manual Q&AAnswer
Mar 01, 2025 - 06:00 AM
To configure the network settings for the DMXking eDMX4 MAX DIN ArtNet-sACN to DMX Controller, you can use the eDMX Configuration utility provided by DMXking. Here are the steps to configure the network settings:
1. Connect the DMX controller to your computer using an Ethernet cable.
2. Download and install the eDMX Configuration utility from the DMXking website.
3. Open the eDMX Configuration utility.
4. In the Network tab, the utility will automatically detect the connected DMX controller and display its IP address.
5. Make sure the Network Mode is set to "Static IP address" if you want to manually configure the IP address. If you want to use DHCP, select "DHCP".
6. Enter the desired IP Address, Subnet Mask, and Default Gateway in the respective fields.
7. Click on the "Update Network Settings" button to apply the changes.
Note: It is recommended to consult the user manual for detailed instructions and additional network configuration options.
Add New Comment