How do I install the inVENTer aV100 ALD Air Supply Vent? (inVENTer aV100 ALD Air Supply Vent Instruction Manual)

Answer

manuals.plus

Mar 01, 2025 - 05:52 AM

Installation of the inVENTer aV100 ALD Air Supply Vent involves the following steps:

1. Choose the installation location: The vent should be installed in an external wall, preferably in a room with high humidity or odors. Ensure that there are no obstacles or obstructions in the chosen location.

2. Mark the drilling points: Use the template provided in the manual to mark the drilling points on the wall. Ensure that the vent is positioned correctly and level.

3. Drill the holes: Use a suitable drill bit to drill the holes at the marked points. The diameter of the holes should match the size of the supplied wall plugs.

4. Insert the wall plugs: Insert the wall plugs into the drilled holes.

5. Mount the vent: Attach the vent to the wall by aligning the mounting holes with the wall plugs. Secure the vent using the supplied screws.

6. Connect the electrical wiring: Follow the instructions in the manual to connect the electrical wiring of the vent. It is recommended to consult a qualified electrician for this step if you are not familiar with electrical work.

7. Test the vent: Once the installation is complete, test the vent by turning on the power and adjusting the settings according to your preferences. Refer to the controller's instructions for detailed information on adjusting the settings.

Please note that the above steps are a general overview of the installation process. For specific details and illustrations, refer to the inVENTer aV100 ALD Air Supply Vent Instruction Manual provided by inventer GmbH.