User Manual Q&AAnswer
Mar 01, 2025 - 05:46 AM
The VIVREMV2 wireless remote bass control is auto-programmed to pair with your VIV amplifier directly out of the box. There is no need for manual pairing. Simply ensure that the VIVREMV2 is charged or hardwired into your electrical system before use. To charge the VIVREMV2, use the enclosed USB to USB-C cable and connect it to a power source. Charging takes approximately 4 hours, and the LED on the VIVREMV2 will turn off when the charge is complete. On a full charge, the VIVREMV2 can last up to approximately 3000 hours of use.
If you prefer not to rely on charging, you can hardwire the VIVREMV2 to your vehicle's electrical system using the USB-C to hardwire connection included in the box. Tap the hardwire connection into your vehicle's positive (+) electrical system and plug the USB-C end into your VIV-REM. If you are unsure about the hardwiring process, it is recommended to contact your local Memphis Audio retailer for assistance.
Please refer to the owner's manual for more detailed instructions and diagrams on charging and hardwiring the VIVREMV2.
Add New Comment