User Manual Q&AAnswer
Mar 01, 2025 - 05:44 AM
To assemble the Schuller 507818 Lighting Table Lamps, please follow the steps below:
1. Unpack all the components of the lamp carefully, especially the crystal parts, as they are not pre-assembled.
2. Start by attaching the lamp base to the lamp body. Align the holes on the base with the corresponding holes on the body and secure them together using the provided screws or other fastening mechanisms.
3. Once the lamp base and body are securely attached, proceed to attach the lampshade. Gently place the lampshade over the lamp body, ensuring that it fits properly and aligns with the base. Some lampshades may require additional assembly, such as attaching decorative elements or securing them with screws. Refer to the lampshade assembly instructions provided with the product.
4. After assembling the lampshade, carefully insert the included LED light bulbs into the lamp sockets. The Schuller 507818 Lighting Table Lamps require three G9 LED light bulbs, which are included in the package. Make sure to handle the bulbs with care to avoid damaging them.
5. Once the bulbs are inserted, connect the lamp to a power source and switch it on to test the lighting. If the lamp does not turn on, ensure that the bulbs are properly inserted and that the power source is functioning correctly.
Cleaning and Maintenance:
- To clean the lamp, use a soft, dry cloth to gently wipe off any dust or dirt. Avoid using abrasive cleaners or solvents that may damage the lamp's finish or crystal parts.
- When changing light bulbs, ensure that the lamp is switched off and unplugged from the power source. Carefully remove the old bulbs and replace them with new ones of the same type (G9 LED).
- Regularly check the lamp for any loose screws or parts and tighten them if necessary.
Please refer to the Schuller 507818 Lighting Table Lamps Instruction Manual for more detailed instructions and safety guidelines.
Add New Comment