Answer

Mar 01, 2025 - 05:43 AM
To select the wattage and color temperature for the , you will need to use the dip switches located on the light fixture before installation. Here's how you can do it:
1. Turn off the power supply and slide the end caps of the light fixture.
2. Remove the LED diffuser part from the base housing.
3. Locate the dip switches on the circuit board inside the fixture.
4. Use the dip switches to select the desired wattage and color temperature. The available wattage options are 20W, 30W, and 40W. The available color temperature options are warm white, white, and cool white.
5. Once you have made your selections, assemble the diffuser back to the base and fit the two caps.
6. Mount the fitting onto the ceiling using wall plugs and screws.
7. Wire the cable into the terminal block through the cable entry hole.
8. Turn on the power supply to ensure the light is working properly.
Please note that it is important to follow local and national wiring rules and have the installation performed by a licensed electrician.
Add New Comment