How do I attach the pole to the ceiling mount using the AURORA MOUNTS AFC-CP Ceiling Plate With Plastic Cover? (AURORA MOUNTS AFC-CP Ceiling Plate Plastic Cover Instruction Manual)

Answer

manuals.plus

Mar 01, 2025 - 05:16 AM


To attach the pole to the ceiling mount using the AURORA MOUNTS AFC-CP Ceiling Plate With Plastic Cover, please follow these steps:

1. Ensure that you have all the components listed in the checklist, including the ceiling plate (BB), plastic cover (CC), end cap (EE), open wrench (B1), 6mm hex key (B2), screws (C1, C3), washers (C2), nuts (C4), coach screws (C5), and plastic anchors (C6).

2. Begin by attaching the pole to the ceiling mount. Please refer to the specific instructions provided with your ceiling mount for this step.

3. Once the pole is securely attached to the ceiling mount, proceed to fix the ceiling plate (BB) to the ceiling. The method of installation will depend on the type of ceiling you have:

   a) For brick or concrete ceilings:
      - Use the M8x70mm screws (C1) to attach the ceiling plate to the ceiling.
      - Ensure that you use the M8 washers (C2) between the screws and the ceiling plate for added stability.

   b) For wood ceilings:
      - Use the M8x60mm  xxxx  (C3) to attach the ceiling plate to the ceiling.
      - Again, make sure to use the M8 washer (C2) between the  xxxx  and the ceiling plate.

4. After fixing the ceiling plate, you can cover it with the plastic cover (CC) for a clean and finished look. The plastic cover should snap into place on the ceiling plate.

5. Finally, if desired, you can attach the end cap (EE) to the pole for additional aesthetic appeal.

Please note that these instructions are a general guideline. It is always recommended to refer to the specific instruction manual provided with your AURORA MOUNTS AFC-CP Ceiling Plate With Plastic Cover for detailed and accurate installation steps.