Answer

Mar 01, 2025 - 05:12 AM
To install the woood 375943-N Holly Floor Lamp, please follow these steps:
1. Before starting the installation, ensure that the lamp is disconnected from the mains power.
2. Make sure the lamp is securely supported during installation.
3. Wear gloves during installation to avoid scratching the lamp surface.
4. Check that the electrical supply complies with the type stated on the rating label.
5. Use a suitable model and wattage for the lighting source.
6. Avoid touching the shade and bulb when the lamp is working.
7. Before replacing the bulb, cut off the power and allow the bulb and shade to cool down.
8. Clean the lamp using a dry cloth.
9. If the external flexible cable or cord of the luminaire is damaged, it should be replaced exclusively by the manufacturer, their service agent, or a qualified person to avoid hazards.
10. For hard floors, it is recommended to place felt glides under the legs of the lamp to prevent damage.
Please refer to the provided instruction manual for further details and illustrations on the installation process.
Add New Comment