User Manual Q&AAnswer
Mar 01, 2025 - 05:10 AM
To install the driver and software for the ZWO ASI 120MM-S USB 3.0 Mono Camera on Windows, please follow these steps:
1. Download the ASI Cameras driver from the ZWO website: https://astronomy-imaging-camera.com/...
2. Install the downloaded driver.
3. After plugging in the camera, check if your ZWO camera model is listed under the "imaging devices" category in the Device Manager. This indicates that the driver has been installed successfully.
4. Download the ASI CAP (image or video capture software) from the ZWO website, choosing your camera model and clicking the "Connect" icon.
5. Once connected, you will be able to see the preview video. Please note that without a lens or scope, you will only see some brightness in the preview video.
6. For more detailed instructions, refer to the user manual available on the ZWO website: https://astronomy-imaging-camera.com/...
If you encounter any issues during the installation process, please refer to the troubleshooting section in the user manual or contact ZWO support for further assistance.
Add New Comment