User Manual Q&AAnswer
Mar 01, 2025 - 05:07 AM
Sure! Here is a step-by-step installation guide for the spex Stylo Heavy-Duty Compatibility Kit:
1. Start by attaching the Mounting Block to the Stylo HDCK Plate. Use the M6 x 25mm screws and washers provided with the Mounting Block. Use a 4mm hex key to tighten the screws.
2. Next, attach the Stylo HDCK Plate to the Back Support. Use the M6 x 25mm bolt and washers provided in the fastener kit. Use a 4mm hex key to tighten the bolts.
3. With the ball clamped in the Stylo 160 or Stylo 260 mechanism, insert the M4 x 10mm grub screws into the threaded hole opposite the clamp. Tighten the screws against the ball to further lock it in place. Use a 2mm hex key to tighten the screws.
Please note that this is a supplementary installation guide. For full information and warnings, refer to the Head Support User Manual provided with your Head Support.
If you have any further questions or need additional assistance, you can contact Spex Ltd at fasterresults@spexseating.com or call +643 307 9790. You can also visit their website at www.spexseating.com for more information.
Add New Comment