User Manual Q&AAnswer
Mar 01, 2025 - 05:04 AM
To adjust the sag on the LEGEND Revo-A Adjustable Coil Suspension, follow these steps:
1. Verify that the springs on each shock are adjusted evenly, with the same number of threads exposed below the spring.
2. Sit on the motorcycle with your riding gear, a passenger, and the load you intend to carry.
3. Measure the shock length from the center of the lower mounting bolt to the center of the upper mounting bolt.
4. Refer to the table provided in the installation guide to determine the proper sag measurement based on the shock length.
5. If the measured length is less than the proper sag measurement, increase the spring preload by threading the spring up the shock body to tighten the spring (less sag).
6. If the measured length is greater than the proper sag measurement, decrease the spring preload by threading the spring down the shock body to tighten the spring (more sag).
7. Make equal adjustments to both the left and right shocks.
It is important to note that proper sag adjustment is crucial for optimal suspension performance and handling. Adjusting the sag ensures that the suspension is properly set up for your weight and riding conditions.
Add New Comment