User Manual Q&AAnswer
Mar 01, 2025 - 05:02 AM
To add the Nice Wireless Water Leak Detector to your Z-Wave network, follow these steps:
1. Open the cover of the detector.
2. Place the detector within the direct range of your Z-Wave controller.
3. Set the main controller in (security/non-security) add mode (refer to your controller's manual for instructions).
4. Quickly press the TMP button on the detector three times.
5. Wait for the adding process to complete.
6. The Z-Wave controller will confirm the successful addition of the detector.
Note: If you encounter any issues during the adding process, you can try resetting the detector and repeating the adding procedure.
For more detailed instructions and information, refer to the "Adding the Device" section in the instruction manual provided with the Nice Wireless Water Leak Detector.
Add New Comment