User Manual Q&AAnswer
Mar 01, 2025 - 05:00 AM
To install the THULE 186080 Custom Adapter Kit on your vehicle, please follow the steps outlined in the installation instructions provided in the user manual. Here is a step-by-step guide:
1. Start by ensuring that you have all the necessary components included in the box. The contents should include the adapter kit, mounting brackets, screws, and any additional hardware required.
2. Before installation, make sure to clean the mounting surface on your vehicle to ensure proper adhesion. Use a mild detergent and water to remove any dirt or debris.
3. Determine the appropriate location for mounting the adapter kit on your vehicle. Refer to the user manual for specific instructions on where to place the kit based on your vehicle's make and model.
4. Attach the mounting brackets to the adapter kit using the provided screws. Make sure to tighten them securely, but do not overtighten.
5. Position the adapter kit on the mounting surface of your vehicle, aligning it with the designated mounting points. Ensure that it is centered and level.
6. Secure the adapter kit to your vehicle by tightening the mounting screws. Again, be careful not to overtighten, as this may damage the kit or your vehicle.
7. Once the adapter kit is securely installed, double-check all the connections and ensure that everything is properly aligned.
8. Test the stability of the adapter kit by gently shaking it. If there is any movement or looseness, recheck the installation and tighten any loose screws.
9. Finally, refer to the user manual for any additional instructions or recommendations regarding the use and maintenance of the THULE 186080 Custom Adapter Kit.
If you encounter any difficulties during the installation process or have any further questions, it is recommended to contact THULE directly. You can reach them via email at info@thule.com or visit their website at www.thule.com for additional support and assistance.
Add New Comment