How do I install the AURORA MOUNTS AFC-PC Single Pole Clamp? (AURORA MOUNTS AFC-PC Single Pole Clamp Instruction Guide)

Answer

manuals.plus

Mar 01, 2025 - 04:56 AM


To install the AURORA MOUNTS AFC-PC Single Pole Clamp, please follow these steps:

1. Ensure that you have all the components listed in the checklist: 
   - A: Rail-Pole Plate (1 piece)
   - B: M8 x 10mm  xxxx  (4 pieces)
   - C: M8 Sliding Nut (4 pieces)
   - D: 5mm Allen key (1 piece)
   - E: 6mm Allen key (1 piece)

2. Identify the desired location on the pole where you want to mount the clamp.

3. Place the Rail-Pole Plate (A) around the pole at the desired location. Make sure the plate is aligned properly.

4. Insert the M8 x 10mm Screws (B) through the holes in the Rail-Pole Plate (A) and tighten them using the 6mm Allen key (E). Ensure that the screws are securely fastened to the pole.

5. Attach the M8 Sliding Nuts (C) onto the Rail-Pole Plate (A) by sliding them into the desired positions along the plate. These sliding nuts will be used to attach other accessories or equipment to the clamp.

6. Once the sliding nuts are in place, you can use the 5mm Allen key (D) to tighten them securely. This will prevent the sliding nuts from moving or rotating unintentionally.

7. Double-check the installation to ensure that all components are securely fastened and the clamp is stable.

Please note that this answer is based on the information provided in the manual for the AURORA MOUNTS AFC-PC Single Pole Clamp. For further assistance or clarification, it is recommended to visit the official website at auroramounts.com.au or contact Aurora Mounts directly at info@auroramounts.com.au.