User Manual Q&AAnswer
Mar 01, 2025 - 04:48 AM
To install the Orbegozo PHF 55 Electric Patio Heater, you will need the following tools: pencil, hammer, level, screwdriver, power drill, and drill bits. Here are the steps to install the heater:
1. Determine the desired location for the heater on a wall or ceiling, ensuring it is at least 1.8m above the floor.
2. Use a pencil to mark the position where you want to place the heater. Check if the marks are level.
3. Use a power drill and appropriate drill bits to make holes in the marked positions.
4. Insert long screws with fixing studs into the holes.
5. Place the wall support provided with the heater onto the screws and secure them with nuts.
6. Attach the other wall support to the heater using short screws.
7. Adjust the angle of tilt as desired.
8. Ensure that the power cord does not come into contact with the housing or grill of the heater when it is working. You can fix the power cord to the wall support using plastic flanges to prevent any damage.
9. Always ensure that the heater is placed in a horizontal position and not tilted.
Please refer to the instruction manual for any additional information or specific guidelines regarding the installation process.
Add New Comment