User Manual Q&AAnswer
Mar 01, 2025 - 04:44 AM
To charge the battery for the VOLPI PV280 Electrical Pruning Shear, please follow these steps:
1. Make sure the battery is dry and clean before charging.
2. Disconnect the battery from the tool before charging.
3. Use the charger specified by the manufacturer. Using other chargers can damage the battery and cause a fire.
4. Plug the charger into a power outlet with the correct voltage (100-240V AC, 50-60Hz).
5. Insert the battery into the charger correctly.
6. The charger will have an LED light indicator. A red light indicates that the battery is charging.
7. Leave the battery to charge for approximately 2.5 hours. The average charging time is 2.5 hours, so do not charge the battery for too long as it may damage the battery.
8. Once the battery is fully charged, the LED light on the charger will turn green.
9. Remove the battery from the charger.
10. The battery is now ready to be used with the VOLPI PV280 Electrical Pruning Shear.
Please note that it is important to charge the battery before first-time use and to charge it at least once every 4 months when not in use to maintain its performance.
Add New Comment