User Manual Q&AAnswer
Mar 01, 2025 - 04:43 AM
To pair the transmitter and receiver, please follow these steps:
1. Make sure both the transmitter (BY-M1LV-TX) and receiver (BY-M1LV-D-RX or BY-M1LV-U-RX) are turned off.
2. Press and hold the power button on the transmitter for 3 seconds to turn it on.
3. Plug the BY-M1LV-D-RX (for iOS devices) or BY-M1LV-U-RX (for USB-C devices) into your mobile device.
4. The system is pre-paired at the factory, so the connection should be established automatically. However, if they are disconnected, follow the next steps.
5. Double-click the power button on the transmitter. The indicator on the transmitter will start flashing blue and red alternately.
6. While the transmitter indicator is flashing blue and red, insert the supplied pairing pin into the small pinhole on the receiver. The indicator on the receiver will start flashing blue rapidly.
7. Within 10 seconds, the transmitter and receiver will be paired, and the indicators on both devices will start flashing blue slowly.
8. You are now ready to record.
Note: It is important to avoid obstacles and close proximity to devices with 2.4GHz signals, as this can affect the wireless signal quality.
For more detailed information and troubleshooting tips, please refer to the user manual provided with the product.
Add New Comment