How do I properly assemble the VIPACK FURNITURE PRORZZ1 Healthy Ergo Study Desk and Chair? (VIPACK FURNITURE PRORZZ1 Study Desk and Chair Instruction Manual)

Answer

manuals.plus

Mar 01, 2025 - 04:40 AM


To assemble the VIPACK FURNITURE PRORZZ1 Healthy Ergo Study Desk and Chair, please follow the provided instructions:



1. Ensure that you have all the necessary parts and tools before starting the assembly process.



2. Place the desk and chair on a flat surface, suitable for indoor use only.



3. Carefully wipe clean the desktop surface if any liquid is splashed on it.



4. Regularly check the screws to ensure there are no loose parts during daily use.



5. Once you have all the parts ready, start by assembling the desk following the desk assembly instructions provided in the manual.



6. Adjusting the height of the desk and chair can be done by following the instructions provided in the manual.



7. To lift up the desk or chair, place one foot on the support bar and pull it up to the required height.



8. To lower down the desk or chair, gently pull it up to the maximum height and then slowly lower it down to the minimum height. Lift it up again to the required height as needed.



9. After the desk and chair are properly assembled, make sure to tightly fasten all the screws.



10. Clean the desktop surface using a damp cloth.



11. Avoid placing the product in areas with corrosive gas and moisture to prevent damage.



If you encounter any specific issues or have further questions during the assembly process, please refer to the VIPACK FURNITURE PRORZZ1 Healthy Ergo Study Desk and Chair Instruction Manual for detailed step-by-step instructions and diagrams.