User Manual Q&AAnswer
Mar 01, 2025 - 04:39 AM
To mount the Siemens DXR1.M09PDZ-112 DXR1 Series Combination of Room Automation Station and Actuator, follow these steps:
1. Shaft mounting: If you need to open the damper clockwise, set the parameter "Control action" in the ABT Site to "Direct". If you need to open the damper counter-clockwise, set the parameter "Control action" in the ABT Site to "Reverse".
2. Limitation of rotary angle: Make sure to attach the mounting bracket properly. The product is only approved with a form-fit insert, such as ASK78.10 for a 12 mm shaft.
3. Tight space installation: If you have limited space for installation, ensure that you use the approved form-fit insert mentioned above.
4. Dimensions: The dimensions of the product are provided in millimeters. Please refer to the product manual for specific measurements.
5. Open Source Software (OSS): If you have any questions or concerns regarding the Open Source Software components used within the product, including copyright and licensing, you can find all the information at https://www.siemens.com/download?A6V1....
For further details and step-by-step instructions, please refer to the Siemens DXR1.M09PDZ-112 DXR1 Series Combination of Room Automation Station and Actuator Instruction Manual.
Add New Comment