How do I install the AUDIBAX Joliet 100 Zoom Lighting System? (AUDIBAX Joliet 100 Lighting System User Manual)

Answer

manuals.plus

Mar 01, 2025 - 04:36 AM

To install the AUDIBAX Joliet 100 Zoom Lighting System, follow these steps:

1. Read the safety information in the user manual before installing the fixture.
2. The fixture is designed for indoor use only and must be installed in a dry location with adequate ventilation. Ensure that none of the fixture's ventilation slots are blocked.
3. Fasten the fixture to a secure structure or surface. Do not place it on a surface where it can be moved or fall over. If installing the fixture in a location where it may cause injury or damage if it falls, secure it using a securely anchored safety cable.
4. If fastening the fixture to a flat surface, ensure that the surface and all fasteners used can support at least 10 times the weight of all fixtures and equipment to be installed on it.
5. If mounting the fixture on a truss, use an open-type clamp or a half-coupler clamp that completely encircles the truss chord. Ensure that the rigging structure can support at least 10 times the weight of all fixtures and equipment to be installed on it.
6. Secure the fixture with a safety cable by looping the cable through the eyebolt in the back of the fixture and around a secure anchoring point. Do not loop the safety cable around the fixture's mounting bracket only.
7. Connect the fixtures in a DMX chain by connecting the DMX output of the first fixture to the DMX input of the next fixture. Continue connecting one output to the input of the next fixture until all fixtures are connected.
8. If necessary, use a DMX terminator at the last fixture in the chain to prevent corruption of the digital control signal by electrical noise.
9. Connect the fixture to the mains using the enclosed power supply cable. Ensure that the power requirements are met and follow the correct cable color connections (brown for live, blue for neutral, yellow/green for earth/ground).
10. Repeat the installation process for additional fixtures, if needed.

Please refer to the user manual for more detailed instructions and safety precautions.