User Manual Q&AAnswer
Mar 01, 2025 - 04:36 AM
To install the Miele 08245430 Water Filter for Filtering Water Intake, please follow the steps below:
1. Turn off the water supply: Before installing the water filter, make sure to turn off the water supply to the appliance.
2. Locate the water connection: Identify the water connection on the appliance where the filter will be installed. This is typically located at the back of the appliance.
3. Remove the inlet hose: Disconnect the inlet hose from the water connection. This hose is usually connected to the water supply.
4. Install the water filter: Take the Miele 08245430 Water Filter and connect it between the water connection and the inlet hose. Ensure that the filter is securely attached to both ends.
5. Reconnect the inlet hose: Once the filter is installed, reconnect the inlet hose to the water connection. Make sure it is tightly secured.
6. Turn on the water supply: After the installation is complete, turn on the water supply to allow water to flow through the filter.
7. Check for leaks: Inspect the connections for any leaks. If you notice any leaks, tighten the connections or consult the user manual for troubleshooting steps.
Please note that these instructions are a general guideline. For specific installation instructions and any additional information, it is recommended to refer to the user manual provided by Miele.
Add New Comment