User Manual Q&AAnswer
Mar 01, 2025 - 04:35 AM
To connect the VigilLink VLHA-EMR HDMI 2.0 Audio Embedder to your devices, follow these steps:
1. Connect your HDMI source device (e.g., DVD player or set-top box) to the "HDMI In" port on the front panel of the audio embedder.
2. If you want to input analog audio, connect your analog audio source to the "Line In" port on the front panel. If you want to input optical audio, connect your optical audio source to the "Optical In" port on the front panel.
3. Connect your HDMI display device (e.g., TV or projector) to the "HDMI Out" port on the rear panel of the audio embedder.
4. Connect the included 5V/1A power adapter to the "DC 5V" port on the rear panel of the audio embedder, and then plug the adapter into an AC wall outlet for power supply.
5. Turn on your devices and select the desired input audio format using the dial switch on the rear panel of the audio embedder. Set it to "HDMI" for audio from the HDMI input, "Optical" for audio from the optical input, or "Line" for audio from the line input.
Once connected and powered on, the audio embedder will pass the audio signals from your source devices to your HDMI display device.
Please refer to the user manual for more detailed instructions and troubleshooting information.
Add New Comment