User Manual Q&AAnswer
Mar 01, 2025 - 04:10 AM
To install the , follow these steps:
1. Transporting the appliance:
- Transport the appliance only in suitable packaging.
- Transport the appliance upright.
- Do not transport the appliance on your own.
2. Installing the appliance:
- Stand the appliance so that it is not touched by connectors or main cables.
- Do not plug the appliance or any others into sockets located near the rear of the appliance.
- Only use the appliance when it is installed.
- Do not damage the piping of the refrigeration circuit.
- Do not place appliances emitting heat on the appliance.
3. General safety information:
- Only install, connect, and dispose of the appliance according to the instructions.
- The socket must be easily accessible for emergency disconnection.
- Do not operate the appliance outdoors or in areas exposed to splash water or damp conditions.
- Do not install the appliance in a location exposed to direct sunlight or near a heat source.
- The floor at the installation site must be flat and level.
- Do not install the appliance alone; it is best to work together with two or more people.
4. Appliance dimensions and recess dimensions:
- The appliance should be installed under a worktop.
- Check the wall thickness of the adjoining cabinets.
- Align the kitchen unit using a spirit level and marking square.
- Ensure that the floor and walls of the unit are at right angles to one another.
- The unit door must be at least 16 mm and maximum 19 mm thick.
- There must be a gap of minimum 3 mm width between the door and the unit door located above it.
- The unit door must be planar and mounted stress-free.
These are the basic installation instructions for the LIEBHERR SUIG1514 Base Unit Fridges and Freezers. For more detailed information and specific instructions for your model, please refer to the installation guide provided by the manufacturer.
Add New Comment