Answer

Mar 01, 2025 - 03:45 AM

To connect the DEPRAG D52-ADC Dental Milling Machine to a local area network or the internet, follow these steps:
1. LAN1 Port (Local Area Network):
- Connect the LAN1 port of the milling machine to a computer or switch using an Ethernet cable.
- Set the IP address and subnet mask by entering the background settings. Use the on-site IP network segment and subnet mask setting format. The IP address input requires a keyboard connected to the USB interface.
- After setting the IP and subnet mask, save the settings and restart the device.
- Unzip the transmission software package and locate the FTP application file. Double-click to open it.
- In the FTP interface, set the name and the same IP address as the system.
- Click the "+" button, then click the "read" button. If the green "read current task 100%" is displayed below, it indicates a successful connection.
- Find the NC file to be transferred in the Hard Disk Drive, click the "Join" button, then click the "send" button. Click "OK" to send the NC file to the local memory and schedule list of the device.
2. LAN2 Port (Internet):
- Connect the LAN2 port of the milling machine to a computer or switch using an Ethernet cable.
- If the customer site network is set to automatically capture IP, simply insert the network cable into the LAN2 port to achieve network connection.
- If the customer uses a static IP address, provide the following information to the manufacturer: ip_address, netmask, gateway, and dns. The manufacturer will configure the updated network file and provide it to you. Update the milling machine with the new network file to achieve network connection.
Please refer to the DEPRAG D52-ADC Dental Milling Machine User Manual for more detailed instructions and illustrations.
Add New Comment