User Manual Q&AAnswer
Mar 01, 2025 - 03:42 AM
To assemble the TAOHFE CT-LQW1-6528 Modern Brown File Cabinet, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Start by identifying all the parts listed in the manual. Make sure you have all the necessary hardware and components before beginning assembly.
2. Carefully remove all packing material from the cabinet, ensuring that you do not accidentally discard any mounting material.
3. Begin by attaching the sides of the cabinet to the back panel. Use the provided screws and tighten them securely. Make sure the cabinet is stable and properly aligned.
4. Next, attach the bottom panel to the sides and back panel. Again, use the provided screws and tighten them securely.
5. Now, attach the drawer slides to the sides of the cabinet. Refer to the manual for the specific instructions on how to properly install the drawer slides.
6. Once the drawer slides are in place, carefully insert the drawers into the cabinet. Make sure they slide smoothly on the installed slides.
7. Finally, check that all screws are tightened properly. Regularly inspect and tighten them as needed, but be careful not to overtighten.
Please note the following important points:
- Do not use or store the file cabinet near open flames or flammable/combustible chemicals.
- If any parts are missing, broken, damaged, or worn, stop using the cabinet until repairs are made and/or factory replacement parts are installed.
- When cleaning the cabinet, avoid using abrasive or acidic agents or stiff brushes. Instead, use a damp, lint-free cloth to clean the surfaces and wipe with a dry cloth.
If you have any further questions or encounter any problems during assembly, please feel free to contact the manufacturer for assistance.
Add New Comment