Answer

Mar 01, 2025 - 03:40 AM
To replace the main filter in the KARCHER IVM 40 Industrial Vacuum Cleaner, please follow these steps:
1. Ensure that the device is switched off and unplugged from the power source.
2. Secure the device with the parking brakes.
3. Unlock and remove the suction head.
4. Unlock and remove the spacer.
5. Remove the main filter from its position.
6. Check the sealing ring for any damage and replace if necessary.
7. Remove any dirt deposits from the clean air side of the filter.
8. Fit the new main filter in the reverse order, ensuring that the filter hold-down device is centered in the filter pockets.
9. Fit and lock the spacer.
10. Fit and lock the suction head.
It is important to note that permanently installed filters should only be replaced by an expert in a suitable area, such as a decontamination station. If you are unsure or need further assistance, it is recommended to contact a KARCHER branch office or authorized customer service site for professional help.
Add New Comment