Answer

Mar 01, 2025 - 03:10 AM
To connect the Surenoo SSP0130A-240240 Series SPI TFT LCD Module to your microcontroller, you will need to follow the wiring instructions provided in the user manual. The manual includes specific instructions for different microcontroller models such as STM32, C51, and MSP430.
For example, if you are using an STM32 microcontroller, you will need to connect the module pins to the corresponding pins on the microcontroller. The pin assignments are as follows:
- GND (Module Pin 1) to GND on the microcontroller
- VCC (Module Pin 2) to 3.3V on the microcontroller
- SCL (Module Pin 3) to the clock pin (e.g., PB13) on the microcontroller
- SDA (Module Pin 4) to the data pin (e.g., PB15) on the microcontroller
- RES (Module Pin 5) to the reset pin (e.g., PB12) on the microcontroller
- DC (Module Pin 6) to the register/data selection pin (e.g., PB10) on the microcontroller
- BLK (Module Pin 7) to the backlight control pin (e.g., PB9) on the microcontroller
Please refer to the user manual for the specific wiring instructions for your microcontroller model.
Add New Comment