User Manual Q&AAnswer
Mar 01, 2025 - 02:50 AM
To program the channels on the REceiver-PRO Miniature UHF for Professional Racers, please follow these steps:
1. Make sure you are on the main screen of the device.
2. Long press on the "Prog" button. This will bring up the channel programming screen.
3. Use the volume up and down buttons to navigate through the channels. The channel number should be highlighted.
4. Once the desired radio frequency (RF) channel is highlighted, use the volume up and down buttons to select the desired channel.
5. Press the "Prog" button once to move to the next programming step.
6. Now, you will be in the sub-channel programming section. Use the volume up and down buttons to navigate through the sub-channel programming options.
7. Select the type of sub-channel coding you want. You can choose from the following options:
- CSQ: Carrier Squelch (No PL or DPL Required)
- PL: Analog Sub Tone
- DPLN: Normal Digital Sub Code
- DPLI: Inverted Digital Sub Code
8. Once you have selected the sub-channel coding type, quickly press the "Prog" button to advance to selecting the proper value of the sub-channel.
9. Use the volume up and down buttons again to select the desired sub-channel tone or code.
10. Once you have selected the proper tone or code, quickly press the "Prog" button once to program the selections and return to the main screen.
By following these steps, you should be able to program the channels on your REceiver-PRO Miniature UHF for Professional Racers. For more detailed instructions, please refer to the user guide provided with the product.
Add New Comment