User Manual Q&AAnswer
Mar 01, 2025 - 02:48 AM
To connect the Blustream HEX100CS-KIT 4K HDBaseT Extender to your devices, follow these steps:
1. Connect one end of an HDMI cable to the HDMI output of your source device (e.g., Blu-ray player, game console) and the other end to the HDMI input of the HEX100CS-TX (Transmitter) unit.
2. Connect one end of a CAT5e/6/6a cable to the HDBaseT output of the HEX100CS-TX unit and the other end to the HDBaseT input of the HEX100CS-RX (Receiver) unit.
3. Connect one end of an HDMI cable to the HDMI output of the HEX100CS-RX unit and the other end to the HDMI input of your display device (e.g., TV, projector).
4. Connect the included 12V/2A DC power supply to the DC 12V xxxx type connector of both the HEX100CS-TX and HEX100CS-RX units.
5. If you want to control your devices using IR, connect the included Blustream 5V IR receiver to the IR IN port of the HEX100CS-RX unit and place the IR emitter near the IR sensor of your source device.
Please refer to the user manual for more detailed instructions and illustrations on connecting the Blustream HEX100CS-KIT 4K HDBaseT Extender to your devices.
Add New Comment