User Manual Q&AAnswer
Mar 01, 2025 - 02:46 AM
To connect the VigilLink VLMX-431HT70 4x3+1 HDMI 2.0 Matrix over HDBaseT 70m 18Gbps to your devices, follow these steps:
1. Connect your HDMI source devices (such as DVD players or set-top boxes) to the HDMI INPUT ports on the transmitter unit of the matrix using HDMI cables.
2. Connect the HDMI output devices (such as TVs or monitors) to the HDMI OUTPUT ports on the transmitter unit using HDMI cables.
3. Connect the HDBaseT receivers (included in the package) to the HDBaseT IN ports on the receiver units of the matrix using UTP cables.
4. Connect the HDMI output ports on the receiver units to the HDTVs or monitors using HDMI cables.
5. Connect the IR receiver cables to the IR IN ports on the transmitter unit and the IR blaster cables to the IR OUT ports on the transmitter unit.
6. Connect the other ends of the IR receiver cables and IR blaster cables to the corresponding IR IN and IR OUT ports on the HDBaseT receiver units.
7. Connect the LAN port on the transmitter unit to an active Ethernet link using an RJ45 terminated cable.
8. Connect the RS-232 port on the transmitter unit to a PC or control system using a Phoenix terminal to transmit commands.
9. Plug the 24V DC power supply into the transmitter and receiver units, and connect the adapter to an AC wall outlet.
Please refer to the user manual for more detailed instructions and diagrams.
Add New Comment