User Manual Q&AAnswer
Mar 01, 2025 - 02:46 AM
To assemble the Kogan KAMN27F7CLA monitor, follow these steps:
1. Open the carton and take out the stand and base.
2. Insert two screws into the base to lock the stand.
3. Install the silicone pad on the base.
4. Attach and snap the cable guide to the stand.
5. Remove the monitor from the carton and keep it in the foam.
6. Place the monitor flat and face down.
7. Clip the stand assembly into the monitor and release the button to complete the stand assembly.
8. Stand the monitor up on the assembled base.
For VESA mounting, follow these additional steps:
1. Open the box and take out the monitor with the protection foam attached.
2. Gently place the monitor on a desktop or table.
3. Ensure all components are removed from the foam covering.
4. Press the release button to remove the stand plate.
5. If the monitor is already attached to the stand, remove the stand before proceeding with VESA mount assembly.
6. Remove the two screws from the rear case.
7. Remove the four VESA screws from the accessory bag and attach them to the rear casing.
8. Follow the instructions provided with the specific wall mount to attach the monitor.
Please refer to the user guide for visual illustrations and additional information on assembly.
Add New Comment