User Manual Q&AAnswer
Mar 01, 2025 - 02:45 AM
To pair the Nedis RF Smart On Wall Switch with a Nedis RF Smart product, follow these steps:
1. Make sure you have already paired the Nedis RF Smart products before installing the On Wall Switch on a wall.
2. Hold the On Wall Switch close to the Nedis RF Smart product you want to pair it with.
3. Activate the pairing mode on the Nedis RF Smart product (refer to the manual of the specific Nedis RF Smart product for instructions on how to do this).
4. Press the "On" button for channel 1 (A1) on the On Wall Switch to pair it with channel 1 of the Nedis RF Smart product.
5. If you want to pair another Nedis RF Smart product to channel 2, repeat steps 2 to 4 using the "On" button for channel 2 (A3).
6. Note that a receiver can be paired with up to 5 different transmitters.
7. It is important not to pair two dimmable receivers or a dimmable receiver and an on/off receiver to the same channel of a transmitter.
For more detailed information and instructions, please refer to the extended manual available online at ned.is/rfws10wt or ned.is/rfws20wt.
Add New Comment