User Manual Q&AAnswer
Mar 01, 2025 - 02:36 AM
To adjust the operating arc of the Claber 87321 Turbina Medium Range Sprinkler, follow these steps:
1. Pull the turret up and turn it anti-clockwise without forcing it until it reaches the stop.
2. Turn the turret clockwise without forcing it until it stops again. This is the adjustment starting point.
3. The sprinkler will start operating from this point, turning anticlockwise.
If you want to adjust the operating arc before installation, follow these additional steps:
1. Insert the key provided or a flat screwdriver into slot "E" located on the sprinkler.
2. Hold the turret still with your hand and turn the key clockwise to increase the irrigation area or anticlockwise to decrease it.
3. Adjust the key until the indicator "D" is pointing at the required irrigation angle.
Please refer to the Claber 87321 Turbina Medium Range Sprinkler User Manual for visual references and further details on adjusting the operating arc.
Add New Comment