User Manual Q&AAnswer
Mar 01, 2025 - 02:34 AM
To install the sleep number Smart Skirt Smart Bed, follow these steps:
1. Unfold and stretch the Smart Skirt around your mattress, creating a U shape with the ends of the skirt at the head of the bed. The long piece of elastic should stretch across the head of the mattress. Make sure the ends of the skirt labeled L and R are on the inside of the skirt, not visible once installation is complete. Note that the Smart Skirt is designed for use on a bed base and should only be used directly on your mattress during installation.
2. If you have a FlexFit adjustable base, raise the head and foot of the base. Starting at the head of the bed, slip the Smart Skirt from the mattress down onto the bed base, below the adjustable base deck. The elastic band should run securely across the outside head portion of the bed base. Fit the corners of the bed skirt snugly over the corners of the base, starting at the head and then at the foot.
3. Starting on one side at the head of the bed, tuck in the 2.5" fabric border between the bed base and the adjustable deck all the way around the bed. Ensure that the top seam is flush with the base. The corners of the skirt should fit snugly on all corners of the bed base. If you have a FlexFit 1 smart adjustable base, you may need two people to manually lift the foot of the adjustable deck while tucking in the bed skirt border.
4. If you have a Sleep Number 360 smart bed with an integrated base or any other base, follow the same steps as above, but tuck in the 2.5" fabric border, including the flap on each side, between the mattress and base all the way around the bed. Again, ensure that the top seam is flush with the base and that the corners of the skirt fit snugly on all corners of the bed base.
5. Once you have completed the above steps, your Smart Skirt installation is now complete.
Please refer to the sleep number Smart Skirt Smart Bed Instruction Manual for further details and illustrations.
Add New Comment