User Manual Q&AAnswer
Mar 01, 2025 - 02:33 AM
To set the speed and time on the CAPP CR3-08X 3D Shaker, follow these steps:
1. Start/Stop: Press the Start/Stop button to start the operation. The Start/Stop LED will start blinking.
2. Setting Time: Press the "Time" button to select the time value. The "Mins" display will blink. Use the "+/-" buttons to set the desired time. A single press of "+/-" will increase or decrease the time value by 1 minute. Long press "+/-" to quickly increase or decrease the time value. The time value gets saved after 5 blinks. The timer is a countdown timer showing the remaining time left. Once the time is over, the shaker stops.
3. Setting Speed: The speed is displayed as RPM. The minimum and maximum speed of this shaker are 10 RPM and 120 RPM, respectively. When the equipment is used for the first time, the speed will be set to zero and shown as "00". Once the speed value is selected, a single press of "+/-" will increase or decrease the speed value by 1 RPM. Long press "+/-" to quickly increase or decrease the speed value. The speed value gets saved after 5 blinks.
Note: The digital display will show the actual speed and time left during operation.
Please refer to the user manual for more detailed instructions and safety precautions.
Add New Comment