Answer

Mar 01, 2025 - 02:23 AM
To properly install the ICEKING RL114W.E Undercounter Larder Fridge, follow these steps:
1. Ensure that you have the necessary clearances for the fridge. Leave 125mm of space between the back and sides of the unit to allow for proper air circulation.
2. Choose a well-ventilated area with temperatures between 16°C and 38°C. The area should be protected from the elements and water spray or drips.
3. Avoid installing the fridge next to ovens, grills, or other heat sources.
4. Make sure the fridge is plugged into an earthed 3-pin socket. Do not remove the earth pin or use an adaptor or extension cable.
5. Level the fridge using the levelling legs at the bottom of the unit.
6. Follow all UK regulations for electrical connection, water, and drains. Use a standard UK electrical supply (220-240v AC only, 50Hz).
7. Ensure that the pipes are not kinked, trapped, or damaged during installation.
8. After installation, allow the fridge to stand upright for approximately 2 hours before turning it on.
9. Clean the interior surface with lukewarm water using a soft cloth.
For more detailed instructions and safety precautions, please refer to the .
Add New Comment