User Manual Q&AAnswer
Mar 01, 2025 - 02:13 AM
To pair the wireless touchpad with a receiver, follow these steps:
1. Make sure the color controller is installed and properly working. When pairing, be within 10 feet of the dimmer (receiver).
2. Disconnect power to the power supply for at least 10 seconds.
3. Press and hold the ON and OFF keys simultaneously on the wireless touchpad. Keep holding the buttons.
4. While continuing to hold the buttons, restore power to the power supply and color controller.
5. Release the buttons.
6. To test, press the ON key of the wireless touchpad to confirm that it can control the receiver. If it doesn't work, repeat the pairing process.
Note: Avoid pressing any key on the wireless touchpad repeatedly or too quickly, as it can cause the receivers to lose synchronization or fail to operate together. Firm and deliberate button presses are required for effective synchronization. All receivers must be within range of the single wireless touchpad for proper synchronization.
For more information and troubleshooting tips, refer to the instruction manual provided with the product.
Add New Comment