How do I install the ika BREMER Cooker Hood? (ika BREMER Cooker Hood Instruction Manual)

Answer

manuals.plus

Mar 01, 2025 - 02:02 AM

To install the ika BREMER Cooker Hood, please follow these steps:

1. Ensure that you have read the instruction manual thoroughly before installation.
2. Only a qualified and trained service technician should undertake the installation work.
3. Check that the mains voltage corresponds to the one indicated on the rating plate fixed inside the hood.
4. Make sure the domestic power supply guarantees adequate earthing.
5. Do not connect the hood to exhaust ducts carrying combustion fumes.
6. If the hood is used in conjunction with non-electrical appliances (e.g., gas burning appliances), ensure sufficient aeration in the room to prevent the backflow of exhaust gas.
7. Maintain a minimum distance of 750mm from the cooker hood to a gas hob and 650mm to an electric hob. If the installation instructions for gas hobs specify a greater distance, follow those instructions.
8. Carefully remove the plastic protective film from all exterior surfaces of the stainless steel hood and chimney before final installation.
9. At least two people will be required to mount the hood.
10. Follow the instructions provided in the manual for wall drilling and brackets fixing, as well as mounting the hood.
11. Use metal ductwork for the duct fixing to reduce the risk of fire.
12. Follow the instructions for the ducted mode air exhaust system and electrical connection.
13. The telescopic chimney assembly involves attaching the decorative chimney bottom and top securely to the hood body and chimney mounting bracket.
14. Refer to the instruction manual for details on the operation of different functions such as stir-fry function, time delay function, ECO mode, lock function, heat cleaning, hand wave sense function, and hood to hob function.
15. Properly clean and maintain the cooker hood as instructed in the manual to ensure its proper performance and longevity.

Please note that this is a general overview of the installation process. For specific details and diagrams, refer to the ika BREMER Cooker Hood Instruction Manual provided.