User Manual Q&AAnswer
Mar 01, 2025 - 02:00 AM
To connect your HDMI source device and HDMI displays to the gofanco G4-0136A 2x2 HDMI Video Wall Processor, follow these steps:
1. Power off all devices including your HDMI source and HDMI display(s).
2. Connect your HDMI source to the Video Wall Processor's HDMI Input using an HDMI cable (HDMI cable not included).
3. Connect your HDMI display(s) to the HDMI Output(s) of the Video Wall Processor using HDMI cable(s) (HDMI cables not included).
4. Plug the included power adapter into the Video Wall Processor's Power Jack, then plug the power adapter into a reliable power outlet.
5. Power on all connected devices. The 2x2 HDMI Video Wall Processor is now ready for use.
Please refer to the "Hardware Installation" section in the user guide for visual diagrams and additional information.
Add New Comment